hard water problem | hard water solutions

Frizzy hair, dry skin, and dirty plates. All of these effects are symptomatic of hard water problems in your house.

If your house has a hard water issue, then there will be no end to the troubles that you see as a result of it.

In this article, we’re going to discuss five of the best hard water solutions that you can start implementing today.

1. Soak Fixtures in Vinegar

The first of the many solutions for hard water is to soak fixtures in vinegar. Hard water is caused by sediment buildup that dissolves into the water, which pollutes it.

So to solve hard water issues, we need to attack the root of the problem: the sediment that is being built on the fixtures. Vinegar is one of the best ways to reduce that sediment buildup, as the chemical makeup of vinegar bonds to that of the hard water pollutant.

2. Flush the Heater Regularly

Next up on the list is to flush the heater regularly. Hard water buildup is most common in the heater because of the fact that sediment more easily dissolves when water is hot than when it is cold.

By flushing the heater thoroughly and regularly, you can reduce hard water proliferation where it happens the most.

3. Clean Pipes Regularly

Beyond fixtures and heaters, hard water problems are also regularly caused by dirty pipes. Over time, as the water flows over and abrases against the metal of your piping, sediment will build on the lining of the pipes.

Consequently, it then rubs off into new water that comes in, precipitating in the water and polluting it. Pipes need to be cleaned regularly to ensure that this doesn’t happen.

4. Use a Magnetic Water Conditioner

A magnetic water conditioner is an appliance that removes dissolved sediment from the water that you consume. This appliance requires effort to use, but the results are well worth it.

Using the magnetic properties of hard water, the appliance will draw out any pollutants in the water, which softens it and makes it much purer and safer to drink.

Check out this article for more information.

5. Invest in a Water Softening System

Last but not least, consider investing in a water softening system that operates throughout your house. This system will be a hefty upfront cost to install, as it permeates every water output point in your house’s plumbing.

However, the result of a building-wide water softening system is all of your water will be soft. In addition to that, you can clean pipes, flush your heater, and the like less regularly than you would have to without a water softening system.

Know Your Hard Water Solutions

There you have it. Now that you know how to fix hard water, you should be only a few days away from pure water all throughout your home! For more hard water solutions and home improvement advice, be sure to take some time to check out the rest of our articles before you leave!

Your Comment

Your email address will not be published. Required fields are marked *